How can I reduce/limit the CPU temperature while backing up?
Limiting PL1 and PL2 has no effect here - CR works on one core and consumes too little power for this limitation to be activated. Despite this, on my NUC13ANHi7 with Intel 1360p, during Cobian Ref operation, I have 100 degrees C for 20-30 minutes and constantly 5.0 GHz in Turbo mode with a load below 20W.
PL settings below TDP (28W) are rather pointless...
This worries me. I am afraid that the life of this equipment will be significantly shortened.
Can I somehow fix this in the program settings or in the copy itself?
1360P does not allow undervolting or clock modification, only PL1 and PL2 are possible.
Limiting PL1 and PL2 has no effect here - CR works on one core and consumes too little power for this limitation to be activated. Despite this, on my NUC13ANHi7 with Intel 1360p, during Cobian Ref operation, I have 100 degrees C for 20-30 minutes and constantly 5.0 GHz in Turbo mode with a load below 20W.
PL settings below TDP (28W) are rather pointless...
This worries me. I am afraid that the life of this equipment will be significantly shortened.
Can I somehow fix this in the program settings or in the copy itself?
1360P does not allow undervolting or clock modification, only PL1 and PL2 are possible.
Statistics: Posted by Glaucos — 08 May 2024, 00:02